CPU |
1. AMD Socket AM5, support for: AMD Ryzen™ 7000 Series Processors
|
Chipset |
1.AMD B650
|
Memory |
1.Support for DDR5
6400(OC)/6200(OC)/6000(OC)/5600(OC)/5200/4800/4400 MT/s memory
modules
2. 4 x DDR5 DIMM sockets supporting up to 192 GB (48 GB single DIMM
capacity) of system memory
3. Dual channel memory architecture
4. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory
modules
5. Support for AMD EXtended Profiles for Overclocking (AMD EXPO™)
and Extreme Memory Profile (XMP) memory modules
(The CPU and memory configuration may affect the supported memory
types, data rate (speed), and number of DRAM modules, please refer
to "Memory Support List" for more information.)
|
Onboard Graphics |
Integrated Graphics Processor:
1. 1 x DisplayPort, supporting a maximum resolution of 3840x2160@144
Hz
* Support for DisplayPort 1.4 version and HDR.
2. 1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz
* Support for HDMI 2.1 version and HDCP 2.3.
** Support native HDMI 2.1 TMDS compatible ports.
(Graphics specifications may vary depending on CPU support.)
|
Audio |
1. Realtek® Audio CODEC
2. High Definition Audio
3. 2/4/5.1/7.1-channel
* You can change the functionality of an audio jack using the audio
software. To configure 7.1-channel audio, access the audio software
for audio settings.
|
LAN |
1. Realtek® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)
|
Wireless Communication module
|
AMD Wi-Fi 6E RZ616 (MT7922A22M) (For PCB rev. 1.0)
1. WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency
bands
2. BLUETOOTH 5.2
3. Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data
rate
Intel® Wi-Fi 6E AX210 (For PCB rev. 1.1)
1. WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency
bands
2. BLUETOOTH 5.3
3. Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data
rate
(Actual data rate may vary depending on environment and
equipment.)
|
Expansion Slots |
CPU:
1.1 x PCI Express x16 slot, supporting PCIe 4.0 and running at
x16 (PCIEX16)
* For optimum performance, if only one PCI Express graphics card is to
be installed, be sure to install it in the PCIEX16 slot.
Chipset:
1.2 x PCI Express x16 slots, supporting PCIe 3.0 and running at
x1 (PCIEX1_1/2)
|
Storage Interface |
CPU:
1. 2 x M.2 connectors (Socket 3, M key, type 25110/2280 PCIe 4.0 x4/x2
SSD support) (M2A_CPU, M2B_CPU)
Chipset:
1.1 x M.2 connector (Socket 3, M key, type 25110/2280 PCIe 4.0
x4/x2 SSD support) (M2C_SB)
2.4 x SATA 6Gb/s connectors
RAID 0, RAID 1, and RAID 10 support for NVMe SSD storage devices
RAID 0, RAID 1, and RAID 10 support for SATA storage devices
|
USB |
CPU:
1.1 x USB Type-C® port on the back panel, with USB 3.2 Gen 2
support
2.1 x USB 3.2 Gen 2 Type-A port (red) on the back panel
3.1 x USB 3.2 Gen 1 port on the back panel
CPU + USB 2.0 Hub:
1. 3 x USB 2.0/1.1 ports on the back panel
Chipset:
1. 1 x USB Type-C® port with USB 3.2 Gen 2x2 support, available
through the internal USB header
2. 4 x USB 3.2 Gen 1 ports (2 ports on the back panel, 2 ports
available through the internal USB header)
3. 4 x USB 2.0/1.1 ports available through the internal USB headers
|
Internal I/O Connectors
|
1.1 x 24-pin ATX main power connector
2. 1 x 8-pin ATX 12V power connector
3. 1 x 4-pin ATX 12V power connector
4. 1 x CPU fan header
5. 1 x water cooling CPU fan header
6. 2 x system fan headers
7. 1 x system fan/water cooling pump header
8. 2 x addressable LED strip headers
9. 2 x RGB LED strip headers
10. 1 x CPU cooler LED strip/RGB LED strip header
11. 3 x M.2 Socket 3 connectors
12. 4 x SATA 6Gb/s connectors x front panel header
13.1 x front panel header
14.1 x front panel audio header
15.1 x USB Type-C® header, with USB 3.2 Gen 2x2 support
16.1 x USB 3.2 Gen 1 header
17.2 x USB 2.0/1.1 headers
18.1 x Trusted Platform Module header (For the GC-TPM2.0
SPI/GC-TPM2.0 SPI 2.0 module only)
19,1 x serial port header
20,1 x reset button
21.1 x reset jumper
22.1 x Clear CMOS jumper
|
Back Panel Connectors |
1. 2 x SMA antenna connectors (2T2R)
2. 1 x Q-Flash Plus button
3. 1 x DisplayPort
4. 1 x HDMI port
5. 1 x USB Type-C® port, with USB 3.2 Gen 2 support
6. 1 x USB 3.2 Gen 2 Type-A port (red)
7. 3 x USB 3.2 Gen 1 ports
8. 3 x USB 2.0/1.1 ports
9.1 x RJ-45 port
10.3 x audio jacks
|
I/O Controller |
1.iTE® I/O Controller Chip
|
H/W Monitoring |
1. Voltage detection
2.Temperature detection
3. Fan speed detection
4. Water cooling flow rate detection
5. Fan fail warning
6.Fan speed control
* Whether the fan (pump) speed control function is supported will
depend on the fan (pump) you install.
|
BIOS |
1. 1 x 256 Mbit flash
2. Use of licensed AMI UEFI BIOS
3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
|
Unique Features |
1. Support for GIGABYTE Control Center (GCC)
* Available applications in GCC may vary by motherboard model.
Supported functions of each application may also vary depending on
motherboard specifications.
2. Support for Q-Flash
3. Support for Q-Flash Plus
|
Bundled Software |
1. Norton® Internet Security (OEM version)
2. LAN bandwidth management software
|
Operating System |
1.Support for Windows 11 64-bit
2. Support for Windows 10 64-bit
|
Form Factor |
1.ATX Form Factor; 30.5cm x 24.4cm
|